CHAPTER6 Web-Based Management
Mediant 800 Gateway & E-SBC | User's Manual
Page Name Read-Write Access Level Read-Only Access Level Description
Firewall Security Administrator Monitor Assigns read-
write privileges
to Security
Administrator
users for the
Firewall page.
As this is the
highest user
level, only
Security
Administrator
users have write
privileges for this
page. In addition,
as this rule
assigns read-
only privileges to
Monitor users,
which is the
lowest user
level, all higher
user levels (i.e.,
Administrator
and Security
Administrator)
are also
assigned read-
only privileges.
TLS Contexts Security Administrator Security Administrator Assigns read-
write privileges
to Security
Administrator
users for the TLS
Contexts page.
As this is the
highest user
level, no other
user level can
access (read) or
configure (write)
this page.
The following procedure describes how to configure customized access level rules through the
Web interface. You can also configure it through ini file [WebPagesAccessLevel].
➢ To customize access levels:
1. Open the Customize Access Level table (Setup menu > Administration tab > Web & CLI
folder > Customize Access Level).
2. Click New; the following dialog box is displayed:
- 49 -
To Next Page
Loading...
Need help?
General
