Name: AudioCodes Mediant 800
Brand: AudioCodes
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CHAPTER47 License Key

Mediant 800 Gateway & E-SBC | User's Manual

■ acFloatingLicenseAlarm: Sent if you have configured an Allocation Profile that exceeds the

device's resource capability.

■ acCloudLicenseManagerAlarm: Sent upon various conditions such as no connectivity

between the device and OVOC.

For more information, refer to the SNMP Reference Guide.

● For configuring OVOC with the Floating License, refer to the OVOC User's Manual.

● As the Floating License only involves SBC capacity licenses (mentioned

previously), your device must still be installed with a local License Key that enables

the other ordered license-based features (e.g., SIPRec).

● The Floating License cannot operate if the Fixed License Pool is used. Therefore,

before enabling the Floating License, make sure that the Fixed License Pool feature

is disabled (which is done on OVOC).

● The Floating License ignores OVR, LAD, and TDM2SBC capacity licenses that are

defined in the local License Key.

➢ To configure the Floating License:

1. Make sure that the following OVOC-related prerequisites have been fulfilled:

● The Floating License has been purchased from AudioCodes with the required SBC license

capacities and installed on OVOC.

● The devices for which you want to use the Floating License have been configured on

OVOC.

● OVOC has been configured for communication with AudioCodes Cloud License Manager.

For more information on configuring and managing the Floating License on OVOC, refer to the

OVOC User's Manual.

2. Open the Floating License page (Setup menu > Administration tab > Licensefolder >

Floating License).

3. From the 'Floating License' drop-down list, select Enable.

Figure 47-3: Enabling the Floating License

4. Reset the device with a burn-to-flash for your settings to take effect. After the device resets, it

connects with OVOC and the following read-only fields display OVOC-related information:

● 'Connection with OVOC': Displays the device's connectivity status with OVOC:

◆ "Connected": The device is connected to OVOC.

◆ "Disconnected" The device is temporarily disconnected from OVOC due to problems

with the network (HTTPS TCP connection).

◆ "Not Connected": The device is not connected to OVOC.

● 'OVOC IP Address': Displays the IP address of OVOC.

- 939 -

AudioCodes Mediant 800 User Manual

Other manuals for AudioCodes Mediant 800