CHAPTER48 Configuration File
Mediant 800 Gateway & E-SBC | User's Manual
● When loading a Configuration Package file, the device needs to reset for the
settings to take effect.
● For the certificate files, only the root certificate file (.root) can be saved.
● When loading a Configuration Package file, the filenames must be as listed above.
● By default, the Configuration Package file is saved with the filename
"ConfBackupPkg<Serial Number>.tar.gz".
You can save and load a Configuration Package file using the following methods:
■ CLI:
# copy configuration-pkg from|to <URL>
■ Auto-Update Feature: To load the Configuration Package file through the Auto-Update
mechanism, use the ConfPackageURL ini file parameter.
■ SFTP: The Configuration Package file (configuration-package.tar.gz) can also be downloaded
(Get) from the device through SFTP. The file is located in the /configuration directory. Your
SFTP client needs to authenticate itself with the SFTP server (i.e., the device) and access is
granted only to users with Security Administrator level.
■ Web interface:
a. Open the Configuration File page:
◆ Toolbar: From the Actions drop-down menu, choose Configuration File
◆ Navigation tree:Setup menu > Administration tab > Maintenance folder >
Configuration File
b. To save the Configuration Package file: Click the Save Configuration Package button,
and then save the file to a folder on your computer.
c. To load a Configuration Package file:
i. Click the Browse button, and then browse to and select the file on your computer.
ii. Click the Load Configuration Package button; the following message box appears,
informing you that the device will reset after the file is loaded.
iii. Click Yes to continue (or No to cancel the file load). If you click Yes, the device loads
the file and then resets with a save to flash for the settings to take effect.
- 946 -
To Next Page
Loading...
Need help?
General
