EasyManua.ls Logo

AudioCodes Mediant 800 - Page 995

AudioCodes Mediant 800
1482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER49 Automatic Provisioning
Mediant 800 Gateway & E-SBC | User's Manual
To use a file template for automatic provisioning:
1. Define the file types to download by the file template, using the AupdFilesList parameter. Use
the keywords listed in the table below to specify each file type. For example, to specify ini,
License Key, and CPT files:
ini File:
AupdFilesList = 'ini', 'fk', 'cpt'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-files-list ini,fk,cpt
2. Define the URL address of the provisioning server on which the files (specified in Step 1) are
located for download, using the TemplateUrl parameter. When you configure the URL, you
must include the file type placeholder, "<FILE>", which represents the file name. For each file
type specified in Step 1, the device sends an HTTP request to the server, where the
placeholder in the URL is replaced with the filename and extension, as listed in the below table.
For example, if you configure the AupdFilesList parameter as in Step 1 and the TemplateUrl
parameter to:
ini File:
TemplateUrl = 'http://10.8.8.20/Site1_<FILE>'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# template-url http://10.8.8.20/Site1_<FILE>
The device sends HTTP requests to the following URLs:
http://10.8.8.20/Site1_device.ini
http://10.8.8.20/Site1_fk.ini
http://10.8.8.20/Site1_cpt.data
3. Place the files to download on the provisioning server. Make sure that their file names and
extensions are based on the hardcoded string values specific to the file type for the <FILE>
placeholder (e.g., "Site1_device.ini" for the ini file), as shown in the table below.
Table 49-1: File Template Keywords and Placeholder Values per File Type
File Type
Keywords for
Template File
Value Replacing
<FILE> Placeholder
ini file ini device.ini
CLI Script file cli cliScript.txt
CLI Startup Script file clis cliStartupScript.txt
CMP file based on timestamp acmp autoFirmware.cmp
User Information file usrinf userInfo.txt
- 955 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals