AudioCodes MP-20 Series - Page 101

User's Manual 9. Configuring VoIP Parameters
Version 4.4.3 101 MP-20x Multimedia Home Gateway
9.6.1.3.1 Playing current WAN IP address/Subnet Mask/GW and firmware:
1. Connect a telephone to one of the FXS ports.
2. Lift the handset and dial ‘***’
(three stars).
3. Wait for the 'Configuration Menu' voice prompt to be played.
 To play the IP address:
a. Press 1 followed by the pound key (#); the current IP address of the device is
played.
b. Press the # key to return to the main menu.
 To play the Subnet Mask:
a. Press 2 followed by the # key; the current subnet mask of the device is played.
b. Press the # key to return to the main menu.
 To play the Default Gateway:
a. Press 3 followed by the # key; the current default gateway of the device is played.
b. Press the # key to return to the main menu.
 To play the firmware version:
a. Press 4 followed by the # key; the current firmware version of the device is
played.
b. Press the # key to return to the main menu.
9.6.1.3.2 Modifying WAN Ethernet IP settings
1. Connect a telephone to one of the FXS ports.
2. Lift the handset and dial ‘***<password>#’ (three stars followed by admin password,
and pound key, #).
3. Wait for the 'Configuration Menu' voice prompt to be played.
 To change the IP address:
a. Press 1 followed by the pound key (#); the current IP address of the device is
played.
b. Press the pound key (#) to modify;
c. Dial the new IP address, using the star (*) key instead of periods (.), e.g.,
192*168*0*4, and then press # to finish.
d. Review the new IP address, and then press 1 to save.
 To change the Subnet Mask:
a. Press 2 followed by the # key; the current subnet mask of the device is played.
b. Press the pound key (#) to modify;
c. Dial the new subnet mask (e.g., 255*255*0*0), and then press # to finish.
d. Review the new subnet mask, and then press 1 to save.
 To change the Default Gateway:
a. Press 3 followed by the # key; the current default gateway of the device is played.
b. Press the pound key (#) to modify;
c. Dial the new default gateway (e.g., 192*168*1*1), and then press # to finish.
d. Review the new default gateway, and then press 1 to save.
e. Hang up (on-hook) the handset.