AudioCodes MP-20 Series - Figure 12-1: Network Connections Screen

User's Manual 134 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
 To start the Connection Wizard:
1. From the menu bar, click the Network Connections menu; the 'Network Connections'
screen appears.
Figure 12-1: Network Connections Screen
2. Click the New icon; the ‘Connection Wizard’ screen appears:
Figure 12-2: Connection Wizard Screen
3. Select the required network connection group:
• Internet Connection: Configures an Internet connection when using an external
DSL modem, Cable modem/fiber transceiver or Ethernet connection modem (see
Section 12.1.1 on page 135)
• Advanced Connection: Configures the WAN connection types as well as
network bridging and VLANs.
Notes:
• For configuring VLANS, see Section 12.4 on page 162.
• For configuring network bridging, see Section 12.5 on page 170.