AudioCodes MP-20 Series User Manual

User's Manual 96 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
9.5 Configuring Supplementary Services
The procedure below describes how to configure the services parameters.
 To configure supplementary services:
1. On the 'Voice Over IP' screen, click the Services tab; the following screen appears.
Figure 9-6: Services Tab Screen
2. Configure the parameters, as required. For a description of the parameters displayed
on this screen, see Table 9-7.
3. Click OK to save your settings.

AudioCodes MP-20 Series Specifications

General

Brand	AudioCodes
Model	MP-20 Series
Category	Adapter
Language	English