User's Manual 222 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
NumberOfLines voip/num_of_fxs_lines
Number of instances of Line within this
VoiceProfile.
Table 14-12: InternetGatewayDevice.Services.VoiceService.i.VoiceProfile.i.SIP
TR-069/TR-104
Parameter
Configuration File
Parameter
Description
OutboundProxy voip/
signalling/sip/sip_outbou
nd_proxy/addr
Host name or IP address of the outbound
proxy. If a non-empty value is specified, the
SIP endpoint must send all SIP traffic
(requests and responses) to the host
indicated by this parameter and the port
indicated by the OutboundProxyPort
parameter. This must be done regardless of
the routes discovered using normal SIP
operations, including use of Route headers
initialized from Service-Route and Record-
Route headers previously received. The
OutboundProxy value is not used to
generate the URI placed into the Route
header of any requests.
OutboundProxyPort voip/
signalling/sip/sip_outbou
nd_proxy/proxy
Destination port for connecting to the
outbound proxy. This parameter must be
ignored unless the value of the
OutboundProxy parameter in this object is
non-empty.
ProxyServer voip/signalling/sip/proxy_
address
or
voip/signalling/sip/sip_re
gistrar/addr
Host name or IP address of the SIP proxy
server.
ProxyServerPort voip/signalling/sip/proxy_
port
or
voip/signalling/sip/sip_re
gistrar/port
Destination port for connecting to the SIP
server.
ProxyServer
Transport
voip/signalling/sip/transp
ort_protocol
Transport protocol for connecting to the SIP
server. Must be chosen from among the
transports supported.
RegisterExpires voip/signalling/sip/proxy_
timeout
Register request Expires header value (in
seconds).
RegistrarServer
Transport
voip/signalling/sip/transp
ort_protocol
Transport protocol for connecting to the SIP
server. Must be chosen from among the
transports supported.
UserAgentPort voip/signalling/sip/port
Port for incoming call control signaling.
UserAgentTransport voip/signalling/sip/transp
ort_protocol
Transport protocol for incoming call control
signaling.
To Next Page
Loading...
Need help?
General
