AudioCodes MP-20 Series User Manual

User's Manual 304 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
5. For the device to perform an automatic time update, under the Automatic Time
Update group, do the following:
a. Select the 'Enabled' check box.
b. Select the protocol to be used for time update, by selecting either the 'Time of
Day' or 'Network Time Protocol' option.
c. In the 'Update Every' field, specify how often to perform the update.
d. You can define NTP servers, by clicking the New icon; the ‘Time Server
Settings’ screen appears.
Figure 20-7: Time Server Settings Screen
e. In the ‘Time Server’ field, enter the IP address of the Time server (NTP), and then
click OK.
The following is an example of the relevant Telnet parameters:
rg_conf/admin/timezone=GMT
rg_conf/admin/tz_offset=0
rg_conf/admin/daylight_saving/enabled=0
rg_conf/admin/daylight_saving/from=28&3b;2
rg_conf/admin/daylight_saving/to=28&3b;9
rg_conf/admin/daylight_saving/offset=60
rg_conf/admin/daylight_saving/start/hour=0
rg_conf/admin/daylight_saving/start/minute=0
rg_conf/admin/daylight_saving/end/hour=1
rg_conf/admin/daylight_saving/end/minute=0
rg_conf/admin/tod/enabled=1
rg_conf/admin/tod/protocol=2
rg_conf/admin/tod/server/0/name=pool.ntp.org
rg_conf/admin/sntp/server/enabled=1

AudioCodes MP-20 Series Specifications

General

Brand	AudioCodes
Model	MP-20 Series
Category	Adapter
Language	English