AudioCodes MP-20 Series User Manual

User's Manual 204 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
14.1.2.2 Status and Performance Monitoring
The ability to remotely monitor the status of the device is critical to the service provider,
who wants to support users without having to send a technician on site (avoiding the "truck
roll"). The service provider may want to know the current status of the device (e.g. is it
registered to the SIP proxy, is the phone off-hook) or some statistical information (e.g.
average packet loss during a call).
The device maintains a set of status and performance information internally. This
information (or parts of it) can be retrieved via the different management interfaces (e.g.
Web, or TR-069).
The table below describes the status and performance monitoring (statistical) information
available in the device.
Table 14-2: Status and Performance Monitoring Parameters
Group Description
VoIP
 Current status information per line:

Phone state

Registration status

Source, codec and type of current call
 Packet loss, jitter and delay of current call
Network Connections
 Current status information per interface:

Connection status

Allocated IP address
 Received and transmitted packets
System
 Software version information
 Hardware version information
 System Up time

AudioCodes MP-20 Series Specifications

General

Brand	AudioCodes
Model	MP-20 Series
Category	Adapter
Language	English