User's Manual 14. Remote Device Management
Version 4.4.3 207 MP-20x Multimedia Home Gateway
To enable remote access to the device services:
1. On the 'Advanced' screen, click the Remote Administration icon; the 'Remote
Administration' screen appears.
Figure 14-2: Remote Administration Screen
2. Select the services that you would like to make available to computers on the Internet.
• Allow Incoming WAN Access to Web-Management: Allows access (from a
Web browser) to the Web management interface and to all system settings and
parameters. Both secure (HTTPS) and non-secure (HTTP) access is available.
• Allow Incoming WAN Access to the Telnet Server: Allows access to the
command-line session and to all system settings and parameters (using a text-
based terminal).
• SNMP: Allows Simple Network Management Protocol (SNMP) requests to
remotely configure and monitor the device.
• Diagnostic Tools: Allows remote access for ping and trace route (over UDP)
troubleshooting.
• TR-069: TR-069 is a WAN management protocol for communication between
Customer Premise Equipment (CPE) and an Auto-Configuration Server (ACS). It
defines a mechanism that encompasses secure auto-configuration of a CPE, and
also incorporates other CPE management functions into a common framework.
3. Click OK to save your changes.
To Next Page
Loading...
Need help?
General
