User's Manual 3. Setting up a Network Connection
Version 4.4.3 23 MP-20x Multimedia Home Gateway
3.2 Configuring the MP-20x's Network Connection
The Web-based management interface of MP-20x allows you to control the device's
system parameters. The interface is accessed through a Web browser. For detailed
information on MP-20x's Web-management interface, refer to 'Using the MP-20x's Web
Interface' on page 71.
3.2.1 Logging in to MP-20x Web Interface
The procedure below describes how to login to MP-20x’s embedded Web interface.
To log in:
1. Launch a Web browser on your PC.
2. With your PC connected directly to MP-20x, use URL http://mp20x.home to access the
Web-based management interface; the ‘Login’ screen appears.
Figure 3-2: Logging In
3. In the 'User Name' field, enter your user name.
4. In the 'Password' field, enter your case-sensitive password.
5. Click OK; the 'Quick Setup' screen opens.
Notes:
• The default user name and password is "admin" (case-sensitive). However, it is
recommended to define a new password after your first login session (refer to
'Configuring Users' on page 322).
• If there’s inactivity after logging in, a new login becomes necessary after a lapse of 15
minutes.
To Next Page
Loading...
Need help?
General
