AudioCodes MP-20 Series - Automatic IP Address Ethernet Connection; Figure 8-3: Automatic IP Address WAN Ethernet Connection; Figure 8-4: Pppoe WAN Ethernet Connection; Pppoe

User's Manual 8. Setting up your Device
Version 4.4.3 67 MP-20x Multimedia Home Gateway
8.1.1.2 Automatic IP Address Ethernet Connection
The procedure below describes how to connect to the Internet by automatically obtaining a
WAN IP address and DNS IP address from a DHCP server on the WAN. This method is
the default connection type.
 To configure automatic IP address connection:

From the 'Connection Type' drop-down list, select ‘Automatic IP Address Ethernet
Connection'.
Figure 8-3: Automatic IP Address WAN Ethernet Connection
8.1.1.3 PPPoE
The procedure below describes how to connect to the Internet by PPPoE
 To configure PPPoE connection:
1. Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Point-to-Point Protocol over Ethernet (PPPoE)'.
Figure 8-4: PPPoE WAN Ethernet Connection
2. Configure the PPPoE login username and password (provided by your ITSP).