AudioCodes MP-20 Series - Using the Automatic Dialer for Internet Connection; Recommended Configuration

User's Manual 70 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
8.2 Using the Automatic Dialer for Internet Connection
The Automatic Dialer feature allows the service provider to use one type of pre-configured
devices for WAN Ethernet (DHCP, LT2P or PPPoE).
In the Private Labeling process, the factory setting is burned with the parameters of the
different dialers.
This section describes the recommended process for using the Automatic Dialer.
8.2.1 Recommended Configuration
The recommended factory settings for the Automatic Dialer feature are shown below:
(auto_dialer_detect
(enabled(1))
(done(0))
(connection_type
(0
(type(DHCP))
(enabled(1))
(max_dialer_conn_time(20))
)
(1
(type(L2TP))
(enabled(1))
(server_ip(<Server Name or IP>))
(username(<User Name>))
(password(<Password>))
(max_dialer_conn_time(120))
)
(2
(type(PPPOE))
(enabled(1))
(username(<User Name>))
(password(<Password>))
(max_dialer_conn_time(120))
)
)
(auto_detect_retries(15))
(ping_retries(4))
(ping_retries_timeout(2))
)
(system