User's Manual 8. Setting up your Device
Version 4.4.3 69 MP-20x Multimedia Home Gateway
8.1.1.5 L2TP
The procedure below describes how to connect to the Internet by L2TP.
To configure L2TP connection:
1. Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Layer 2 Tunneling Protocol (L2TP)'.
Figure 8-6: L2TP WAN Ethernet Connection
2. Configure the following (provided by your ITSP):
• L2TP Server Host Name or IP Address
• Login user name
• Login password
3. From the ‘Internet Protocol’ drop-down lists, select the method for assigning an IP
address (provided by your ITSP).
To Next Page
Loading...
