User's Manual 252 Document #: LTRT-50614
MP-20x Multimedia Home Gateway
If the device fails to locate the website:
1. Use a Web browser to verify that the website is available. If it is, then you probably
entered the website address incorrectly.
2. If the website is unavailable, return to the screen 'Website Restrictions' later and click
the button Resolve Now to verify that the website can be found and blocked by the
device.
3. You can edit the website restriction by modifying its entry under the column 'Local
Host' in the screen 'Website Restrictions'.
To modify an entry:
1. Click the icon Edit for the restriction; the screen 'Restricted Website' opens. Modify
the website address, group or schedule as required.
2. Click OK to save your changes and return to the screen 'Website Restrictions'.
To ensure that all current IP addresses corresponding to the restricted websites
are blocked:
1. Click the button Resolve Now; the device checks each of the restricted website
addresses and ensures that all IP addresses at which this website can be found are
included in the IP addresses column.
You can disable a restriction to make a website available again without having to remove it
from the screen 'Website Restrictions'. This can be useful when making the website
temporarily available and when expecting to block it again in the future.
To temporarily disable a rule, clear the check box adjacent to the service name.
To reinstate it at a later time, recheck the check box.
To remove a rule, click the Remove icon for the service; the service is
permanently removed.
To Next Page
Loading...
Need help?
General
