Page 5–22
DuRApulse GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
Chapter 5: Serial Communications
WriTeable binary value objeCT
In GS4, we have BV_000–BV_015 supporting writeable Present_Value property. For these BV_
Objects, we also can use (Multi)Read_Service to access Priority_Array and Relinquish_Default
properties.
Writeable Binary Value Objects
Object Number R/W Object Name Object Description
BV 000
RW ACTIVE CMD (0)FreqCmd=0; (1)FreqCmd=FreqRefValue
BV 001
RW FWD/REV CMD (0)Forward; (1)Reverse
BV 002
RW Reserved Reserved
BV 003
RW HALT CMD (0)None; (1)RampDown to 0Hz
BV 004
RW LOCK CMD
(0)None; (1)OutputFreq stays at current
freqency
BV 005
RW Reserved Reserved
BV 006
RW QSTOP CMD (0)None; (1)Force driver quick stop
BV 007
RW ServoPower CMD (0)PowerOff(free run to stop); (1)PowerOn
BV 008
RW Reserved Reserved
BV 009
RW Reserved Reserved
BV 010
RW Reserved Reserved
BV 011
RW Reserved Reserved
BV 012
RW Reserved Reserved
BV 013
RW Reserved Reserved
BV 014
RW Reserved Reserved
BV 015
RW RESET RESET:(0)Do nothing;(1)Reset fault
sTaTus (read-only) binary value objeCT
In GS4, we have BV_016–BV_031 with read-only Present_Value property. For these BV_Objects, we
do NOT have Priority_Array and Relinquish_Default properties.
Status Binary Value Objects
Object Number R/W Object Name Object Description
BV 016
R ARRIVE STATE (0)Not yet; (1)Arrive (OutputFreq=FreqCmd)
BV 017
R FWD/REV STATE (0)Forward; (1)Reverse
BV 018
R WARN STATE (0)No Warn; (1)Occur Warn
BV 019
R ERROR STATE (0)No Error; (1)Occur Error
BV 020
R Reserved Reserved
BV 021
R Reserved Reserved
BV 022
R QSTOP STATE (0)No QSTOP; (1)Occur QSTOP
BV 023
R SerovPower STATE (0)PowerOff(free run to stop); (1)PowerOn
BV 024
R Reserved Reserved
BV 025
R Reserved Reserved
BV 026
R Reserved Reserved
BV 027
R Reserved Reserved
BV 028
R Reserved Reserved
BV 029
R Reserved Reserved
BV 030
R Reserved Reserved
BV 031
R Reserved Reserved
To Next Page
Loading...
Need help?
General
