Automation Direct DURApulse GS4 User Manual

Appendix A: Accessories
Page A–13
DuRApulse GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
line/load reaCTor speCifiCaTion CharTs
Line Reactors Specifications 230V Models
Part Number
Wire Range Terminal Torque
Fasteners
Temperature Range
Environment
AWG lb·in Operating Storage
LR-21P0-1PH
12 - 18
10
#6-32 x 5/16 in
flathead screw
-40 to +104°F
[-40 to
+40°C]
-40 to +149°F
[-40 to
+65°C]
NEMA: open
IP00
no corrosive
gases
LR-22P0-1PH
20
LR-23P0-1PH
1/4 in-28 x 3/8 in
setscrew
LR-21P0
10
#6-32 x 5/16 in
flathead screw
LR-22P0
LR-23P0
LR-25P0
4 - 18
20
1/4 in-28 x 3/8 in
setscrew
LR-27P5
LR-2010
LR-2015
LR-2020
LR-2025
16 - 18 AWG; 25
6 - 14 AWG; 30
4AWG; 35
captive Phillips
screw
LR-2030
2/0 - 6
(Al or Cu)
120
7/16 in-20 x 5/8
in
setscrew
LR-2040
LR-2050
250kcmil - 6
(Al or Cu)
275
Line Reactors Specifications 460V Models
Part
Number
Wire Range Terminal Torque
Fasteners
Temperature Range
Environment
AWG lb·in Operating Storage
LR-41P0
12 - 18 10
#6-32 x 5/16 in
flathead screw
-40 to +104°F
[-40 to
+40°C]
-40 to +149°F
[-40 to
+65°C]
NEMA: open
IP00
no corrosive
gases
LR-42P0
LR-43P0
LR-45P0
LR-47P5
LR-4010
LR-4015
4 - 18 20
1/4 in-28 x 3/8 in
setscrew
LR-4020
LR-4025
LR-4030
LR-4040
LR-4050
4 - 22
16 - 22 AWG; 25
6 - 14 AWG; 30
4AWG; 35
captive Phillips
screw
LR-4060
LR-4075
2/0 - 6
(Al or Cu)
120
7/16 in - 20 x
5/8 in
setscrew
LR-4100
250kcmil - 6
(Al or Cu)
275
5/8 in - 18 x 7/8
in
setscrew
LR-4125
LR-4150
LR-4200
(1) 600kcmil – 4
(2) 250kcmil – 1/0
500
7/8 in - 14 x 1
setscrew
LR-4250
(2)* 350kcmil – 4
(AL or CU)
275
5/8 in - 18 x 7/8
in
setscrew
LR-4300
* LR-4250 & LR-4300 have dual-connector lugs, and will require multiple conductors per phase of
the appropriate size to fit the lugs.

Automation Direct DURApulse GS4 Specifications

General

Brand	Automation Direct
Model	DURApulse GS4
Category	Controller
Language	English