Automation Direct DURApulse GS4 User Manual

Chapter 6: Maintenance and Troubleshooting
Page 6–15
DuRApulse GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
Warning Codes (continued)
Display on GS4-KPD Keypad
Warning
Code in
2108h
Active
Warning
Descriptions
LOCAL
Warning
WdCPLP
Copy PLC Pass
90
Copy PLC password error
LOCAL
Warning
RdCPL0
Copy PLC Mode
91
Copy PLC read mode error
LOCAL
Warning
WtCPL1
Copy PLC Mode
92
Copy PLC write mode error
LOCAL
Warning
CPLv
Copy PLC Version
93
Copy PLC version error
LOCAL
Warning
CPLS
Copy PLC Size
94
Copy PLC capacity size error
LOCAL
Warning
CPLF
Copy PLC Func
95
Copy PLC: Disable PLC functions to copy
Warning Code 95 could also show up as ERR7 if the
PLC is in STOP mode. Disable the PLC before copying.
LOCAL
Warning
CPLt
Copy PLC TimeOut
96
Copy PLC time-out
Resettable only by cycling power to the drive
LOCAL
Warning
CD10
Card TimeOut
97
Ethernet communication has not been received from the external controller
(within the Ethernet Timeout window)�

Automation Direct DURApulse GS4 Specifications

General

Brand	Automation Direct
Model	DURApulse GS4
Category	Controller
Language	English