Avaya MCC1 - Page 614

Add IP Solutions
Task List: Upgrade TN802B to TN2302AP
614 SI Installation and Upgrades
June 2004
Figure 239: IP Interfaces Screen
Return to Task List
Remove the Circuit Packs
Return to Task List
CAUTION:
When adding or replacing any hardware, be sure to ground yourself against electrostatic
discharge (ESD) by wearing a grounded wrist strap.
NOTE:
The TN799 and TN2302AP circuit packs are hot-swappable, so you do not need to power
down the carrier to remove or install them.
NOTE:
If replacing the existing TN799 circuit pack, remove it first and replace it with the new
TN799DP.
1 Press the recessed Reset button on the TN802B circuit pack until MSHUT* starts flashing on the
LCD. When
MSHUT* is in a steady state, it is safe to remove the circuit pack.
2 Remove the TN799 and TN802B circuit packs.
Return to Task List
change ip-interfaces Page 1 of 2
IP INTERFACES
Inter-region IP connectivity allowed? n
Enable Net
Eth Pt Type Slot Code Sfx Node Name Subnet Mask Gateway Address Rgn
y C-LAN 01A09 TN799 DP clan-a1 255.255.255.0 . . . 1
n MEDPRO med-a1 255.255.255.0 192.168.10 .21 1
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .
n 255.255.255.0 . . .