3. Important Safety Instructions
3.8 Laser Safety
WARNING: Class 1 laser RG2 Product. This projector may become RG3. Refer User Manual before operating.
Do not stare into beam . This projector has a Class 4 laser cluster. Do not attempt to disassemble or modify
this projector.
Special p recautions have to be taken in ord er to protect persons and en vironment. Laser radiation is de fined
as harmful to p erson s and o bjects, an d must be han dled according to instructions g iven.
All power must be switched off during service and replacement of optical components.
After reassembly of Cluster, Laser interface and TI Loop, the unit must be properly tested against leak of light
due to im proper reass em bly of the parts.
This test must take place in a closed area / room, with only service personnel present. The area / room must
have safety signs and warnings indicating t hat there is a restricted / dang er a rea, w ith access on ly to
certified
personnel. Protective googles has to be used by persons inside the test area.
3.9 Warning Labels
Warning Labels
Warning labels are positioned inside the projector, wher e extra S afety precautions are necessary.
Image 3-1 Image 3-2
Image 3-3
High voltage warning. Located on the P owersupply.
12
723–0016 F90 01/12/2017
To Next Page
Loading...
