2. General safety
2. GENERAL SAFETY
2.1 General Safety Instructions
General Safety Instructions.
• The projector is Class 1 laser product that conforms with IEC EN 60825-1:2014. For Northern America, the projector is class
3R laser product up to throw ratio 2.33. The projector conforms with IEC 60825–1:2007, and with performance standards for
laser products under 21 C FR 1040, except with respect to those c haracteristics authorized by Variance Number 2016–V-0144
effective M arch 6, 2017
• This projector is Risk Group 2 (RG2) according to IEC E N 62471-5. This projector m ay become Risk Group 3 (RG3) when an
interchangeable lens with throw ratio greater than 3.15 is installed. For Northern A me rica, installation requirements according
to Risk group 3 (RG3) m ust be followed when interchangeable lens with throw ratio g reater than 2.33 is installed. Refer to the
manual for the lens list and throw ratio b efore o peration. Such combination of projector and lens are intended for professional
use only, and are not intended for consume r use.
• For RG3, no direct exposure to the beam shall be permitted. F or RG 3, operators shall control access to the beam within the
hazard distance or install the p roduct at a height that w ill prevent eye exposure within the hazard distance.
• This projector has a built-in Class 4 laser cluster. Disassembly or modification is very dangerous and should never be attempted.
• Any operation or adjustment not specifically instructed by the user’s guide creates the risk o f hazardous laser radiation expo-
sure.
• Do n ot o pen or disassemble the pr ojector as this may cause damage b y the exposure of laser r adiation.
• Do n ot stare into beam when the projector is on. The bright light may result in perma nent eye da mage.
• Not following the prescribed control, adjustment or operation procedure may cause dama ge by the exposure of laser radiation.
• Before operating this equipment please read this manu al thoroughly and retain it for future reference.
• Installation and preliminary adjustments should be performed by prope rly trained and qualified personnel.
• All warnings on the pr ojector and in the documentation manuals s hould be adhered to.
• All instructions for oper ating and use of th is equipment must be followed precisely.
• All local installation cod es s hould be adhered to.
2.2 Notice on safety
Safety
This equipment is bu ilt in accordance w ith the requirements of the international safety standards IEC 60950-1, as basis for National
safety regulation world wide. The safety standard covers information technology equipment including electrical business equipment
intended to operate in “normal” environments (offices a
nd homes). This safety standard imposes important requirements o n the
use of safety critical components, materials and insulation, in order to protect the user or operator against risk of electric s hock and
energy hazard and having access to live parts. Sa fety standards also impose limits to the internal and external temper ature rises,
radiation levels, m echanical stability and streng
th, enclosure construction and protection against the risk of fire. Simulated single
fault condition testing reduce the risk of hazards and contribute to ensure the safety of the equipment to the user even w hen the
equipment’s normal operation fails..
2.3 Users D efinit ion
Definition
Throughout this man ual, the term SERVICE PERSO NNE L refers to Barco authorized per sons having appropriate technical training
and experience necessary to be knowledgeable of po tential haz ards to which they are exposed (including, but not limited to HIGH
VOLTAGE ELECTRIC and E LEC TRON IC CIRCUITRY and HIGH BR IGHTNES S PROJECTORS) in performing a task, and of mea-
sures to minimize the potential risk to themselves or other persons. Only Barco authorized SERVICE P ER SONNE L, knowledgeable
of such risks, are allowed to perform service functions inside the product enclosure. The term USER and O PER ATOR refers to any
person other than SERVICE PER SO NNEL. W hen an interchangeable lens with throw ratio above a certain level is installed, the
F90 series projector becomes RG3. Refer to the manual for the lens list an d hazard distance before operation. Such combination
of projector and lens are intended for professional us e only, and are not intended for cons umer use.
FOR PRO FESSIONALLY USE ONLY, me
ans inst allation only c an be carried out by BARCO AUTHO R IZE D PER SON NEL familiar
with potential hazards ass ociated with high intensity light beam s.
This product operates on mains voltage. Do not open products without first unplugging the power cord.
It is advised against op erating the product with housing top off, as there is a risk of injury caus ed by high voltage elements, cuts
caused by glass fragments in the ev ent of a ruptured lam p or UV radiation burns.
723–0016 F90 01/12/2017
7
To Next Page
Loading...
Need help?
General
