100
Telephone mode
Dialling number
Use this function to enter a telephone
number and to call this number.
! In the Telephone main menu, select
the entry
Dial number.
The input menu for the telephone
number appears.
! Turn the rotary control/ push button
and then press the rotary control/
push button to select the digits in the
desired telephone number, one after
the other.
Establishing a connection:
! In the input menu, select the Dial entry.
or
! Press the rotary control/ push button
and hold for at least 2 seconds.
The Cascade indicates that a connection
is being established by displaying the
following message.
Press the rotary control/ push button
to abort the call.
If the person called answers the tele-
phone the Cascade switches to the status
display for active telephone calls.
Number is busy
If the number called is busy, the follow-
ing message is displayed (internal
phone and SIM-Access only) and the
busy tone sounds:
! Press the rotary control/ push button
.
If you have activated the automatic redi-
al function as described in “Call set-
tings” on page 107, the following mes-
sage is displayed:
You can then switch off the redial func-
tion for this call by selecting
keine Wied-
erholung
.
Note
Select the symbol to delete the last
character in the entry.
Please also refer to the description in
“Data entry menus” on page 13.
5054
5055
5056
5057
To Next Page
Loading...
Need help?
General
