158
Address book
Find entry
When searching for an address book
entry, you can search based on names or
towns. Please also refer to the descrip-
tion in “Setting the search criterion” on
page 159.
! In the Address Book main menu,
select the
Search for entry entry.
The data entry menu for the name/loca-
tion appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
The last letter entered is highlighted. To
help, the name closest to the previous
entry is displayed. The Cascade offers
only the possible remaining letters for
selection. If no other entries are available,
the Cascade completes the name auto-
matically.
Accept entry:
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
If the complete name/location has already
been entered and/or added automatically,
the address book entry appears.
If an incomplete name/location entry was
confirmed, the selection list appears.
! Turn the rotary control/push button
and then press the rotary control/
push button to select the required
name/location.
The address book entry selected appears.
Note:
If less than 10 address book entries have
been saved, a list of entries appears.
You can then select the required entry
from the list.
6011
Note:
Select the symbol to delete the last
character in the entry.
6012
Note:
If more than one address entry has been
saved for one location, another selection
menu appears.
! Select the required address book entry.
6013
To Next Page
Loading...
Need help?
General
