Becker CASCADE PRO User Manual

189
Settings
! Press the rotary control/push button
to apply the preferred colour
scheme. This quits the menu.
Day/ night design
You can configure settings for the
changeover between day and night de-
sign on your Cascade.
! Select Day/night design in the system
settings.
! Select Interval.
! Press the rotary control/ push button
to switch the function on ( ) or
off ( ).
If the function is switched on ( ),
changeover between day and night
design takes place at short intervals dur-
ing operation (under dim outside light
conditions). This setting protects the dis-
play and prevents what is known as the
“burning-in effect”.
If the function is switched off ( ),
changeover between day and night
design takes place automatically. The
night design is automatically activated
under dim outside light conditions.
External device
You can specify whether an iPod, an
AUX source or an external hands-free
unit is connected to the Cascade instead
of a CD changer.
! Select External device in the system
settings.
! Select between CD changer, iPod, Aux
and External hands-free off (on = ).
Note:
The previously selected colour scheme
is retained even after pressing the
button and after a short time if the sys-
tem is not operated (quitting the menu).
7023
Note:
Only one of the 4 settings can be active
() at one time.
However, all 4 functions may be
inactive ( ) at the same time.
If the Cascade recognises that a CD
changer is connected,
CD changer is
activated ( ). It is then not possible to
switch the function off manually.
The microphone of the Cascade cannot
be used for external hands-free
operation.
7021

Becker CASCADE PRO Specifications

General

Brand	Becker
Model	CASCADE PRO
Category	Car Stereo System
Language	English