194
Voice mode
Voice mode
What is voice mode?
In several instances, voice mode allows
you to control your Cascade simply by
pressing a button and using your voice.
This increases road safety many times
over.
Symbols
This section of the operation guide con-
tains a range of previously unknown
symbols which are outlined briefly here.
In the descriptions of the possible com-
mands in voice mode, a cross-reference
(page XX) to the page in the operation
guide on which the corresponding func-
tion is describe has been included, where
possible.
Some of the voice commands activate a
dialogue between the user and the voice
control system. The operation guide
contains examples of such dialogues.
The following symbols are used in the
example dialogues:
•...*
You can use your voice control system
to store voice entries for stations,
address book entries and/or navigation
destinations. These voice entries are a
component of the various commands
and are represented in the operation
guide by ...*, e.g. “[Listen to] station
...*”.
• ... (1-X)
If a set of brackets containing a number
range appears after the three points,
these three points indicate a number
within this range, e.g. “(1 - 9)”.
• [...]
A word in square brackets in an exam-
ple dialogue is optional. This word is
not absolutely necessary in order for
the command to be understood.
• Symbol
!
In an example dialogue between the
voice control system and user, this
symbol indicates a user voice com-
mand.
• Symbol
"
In an example dialogue between the
voice control system and the user, this
symbol indicates a system announce-
ment text.
• Signal tone symbol #
In an example dialogue between the
voice control system and the user, this
symbol indicates the signal tone which
indicates that the voice control system
is ready for commands to be entered.
To Next Page
Loading...
Need help?
General
