56
Navigation mode
Displaying/Storing position
! Press .
! Turn the rotary control/push button
clockwise until
Position appears on the
top right of the display.
The following information appears:
• If possible, the town and road/geo-
graphical coordinates and height above
sea level (only in the event of sufficient
satellite reception) appear on the left-
hand side of the display.
• The number of satellites which have
been/can be received appears above
the image of the car.
! Press the rotary control/push button
to store the current position.
The current position was saved in fast
access mode.
Displaying traffic
announcements
! Press .
! Turn the rotary control/push button
clockwise until
čMC appears on
the top right of the display.
The following information appears:
• The number of TMC messages
received.
• The number of TMC messages rele-
vant to the route.
! Press the rotary control/push button
.
All TMC messages are displayed.
! To listen to all announcements, select
the
Read out all messages entry.
or
! Select the required announcement.
! Confirm your selection by pressing
the rotary control/push button .
The announcement appears in full.
For more information about traffic
announcements, see “Displaying traffic
information” on page 59.
2077
2078
2079
2069
To Next Page
Loading...
