151
Internet (WAP) function
Changing/deleting an access profile
You can change or delete an existing ac-
cess profile.
! Open the list of access profiles.
! Select the access profile to be modi-
fied or deleted.
! Press the rotary control/ push button
until a menu appears.
! Turn the rotary control/push button
to select one of the following op-
tions:
Change profile or
Delete profile.
! Confirm your selection by pressing
the rotary control/ push button .
If you select
Change profile you can adapt
the profile entries as described in “Cre-
ating access profile” on page 148.
Select the
Delete profile entry to delete the
profile.
! When the prompt appears, select Yes
to delete the access profile or No to
cancel the procedure.
If you select
Yes, the access profile will
be deleted.
Settings
In the Settings you can specify the URL
beginning and the URL ending that is to
be suggested by Cascade.
! Open the WAP main menu.
! Select the Setting entry.
The Settings menu appears.
! Turn the rotary control/push button
to select one of the following op-
tions:
URL start or
URL end.
! Confirm your selection by pressing
the rotary control/ push button .
5244
5245
5246
5247
To Next Page
Loading...
Need help?
General
