Becker CASCADE PRO - Cancelling Traffic Announcements; Possible Settings for am Stations

75
Radio mode
TP volume
You can use this function to control the
increase in volume for traffic announce-
ments.
! In the TP menu, select the Volume
entry.
! Turn the rotary control/push button
to select the required value.
Cancelling traffic
announcements
You can cancel the reception of traffic
announcements.
The following display appears during a
traffic announcement.
! Press the rotary control/push button
.
or
! Press .
Traffic announcements are cancelled.
AM mode
AM mode combines the two wavebands
AM and Short wave.
Possible settings for
AM stations
A number of possible settings may be
made for selecting stations in AM mode:
• Tuning via scan search. See “Scan
search” on page 76.
• Scan function. See “Scan function” on
page 76.
• Via the station memory. See “Station
memory” on page 77.
Notes:
• A setting of “0” indicates no increase
in volume.
• A setting of “10” indicates a signifi-
cant increase in volume.
3014
3015