37
Navigation mode
Navigation to POI in local area
! Call up the navigation fast access
function.
! Select an entry.
! Press the rotary control/ push button
until a menu appears.
! Select the Special dest. in surround. area
or Local point of interest (extern.) entry (if
a storage medium with external points
of interest has been inserted).
! Select the desired destination as
described in “Local” on page 41 or
“External points of interest” on
page 45.
Protecting an entry
! Call up the navigation fast access
function.
! Select the entry to be protected.
! Press the rotary control/push button
until a menu appears.
! Select the Protect entry entry.
! Switch protection on ( ) or off ( )
by pressing the rotary control/push
button .
Protected entries are identified by the
symbol.
Deleting an entry
! Call up the navigation fast access
function.
! Select the entry to be deleted.
! Press the rotary control/push button
until a menu appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the
Delete entry entry.
The entry is deleted from the fast access
list.
Note:
A protected entry is only protected from
being deleted in fast access mode.
However, you can delete this protected
entry individually, and it will also be
deleted when the complete list is
deleted.
To Next Page
Loading...
Need help?
General
