43
Navigation mode
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI.
Route guidance to the selected point of
interest is initiated.
Local area of destination
! In the POI menu, select the In vicinity of
destination
entry.
! Confirm your selection by pressing
the rotary control/push button .
Proceed as described in “Local” on
page 41. If this option is selected, how-
ever, no directions or distances will
appear in the POI list.
In place
! In the POI menu, select the In place
entry.
! Confirm your selection by pressing
the rotary control/push button .
! Select the desired country as described
under “Selecting a country” on
page 28.
! Select the required town as described
under “Entering a destination town”
on page 29.
or
! Select the required postcode as
described under “Selecting destina-
tion via postcode” on page 30.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI cate-
gory.
The data entry menu for POIs appears
or, if fewer than 10 POIs are available in
the selected category, the unit switches
directly to the POI list.
! Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
2055
Note:
You can start a search in the town that
may already be displayed by selecting
Start search.
2050
2051
2052
2053
To Next Page
Loading...
