Becker CASCADE PRO - Point of Interest; Selecting a Destination from the Address Book

40
Navigation mode
Selecting a destination from the
address book
You can find a destination in the address
book and start navigation to it.
! In the Navigation main menu, select
the
Dest. from add. book entry.
! Confirm your selection by pressing
the rotary control/push button .
The address book entries which support
navigation appear.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required entry.
Route guidance to this destination will
be started immediately.
Point of interest
You can select a POI as a main destina-
tion or a stopover.
POIs include petrol stations, airports or
hospitals, for example.
! In the Navigation main menu, select
the
SpecialDest entry.
! Confirm your selection by pressing
the rotary control/push button .
or if route guidance is already active
! In the navigation status display, press
the rotary control/push button .
The Options menu appears.
! Select the Stop-over entry.
! Confirm your selection by pressing
the rotary control/push button .
Note:
If there are more than 9 entries in the
address book, the data entry menu for
locating the required name appears.
2035
2036
2037
2038