31
Navigation mode
Entering the destination road
! In the Enter Destination menu, select
Street.
! Confirm your selection by pressing
the rotary control/push button .
The data entry menu for the road appears
or, if fewer than 10 roads are available in
the town, the unit switches directly to the
road list.
! Turn the rotary control/push button
and then press the rotary control/push
button to select each letter one after the
other.
The last letter entered is highlighted. To
help, the name of the road closest to the
previous entry is displayed. The Cas-
cade offers only the possible remaining
letters for selection. If no other entries
are available, the Cascade completes the
road name automatically.
Accept entry:
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
If you have entered an incomplete road
name, the road list appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required road.
You can now start route guidance by
selecting
Start route guidance or enter a
house number/junction for the road
entered.
2013
2014
2015
2016
To Next Page
Loading...
Need help?
General
