Becker CASCADE PRO - Telephone Mode; Telephone Mode Basics

96
Telephone mode
Telephone mode
Below, you will find information on op-
erating the built-in phone or operating
a mobile phone with Bluetooth® wire-
less technology, connected to the Cas-
cade.
You can only use either the internal phone
or a connected mobile phone equipped
with
Bluetooth ® wireless technology.
However, using the internal telephone
module you can access, via SIM-Access,
the SIM card of a connected mobile phone
equipped with
Bluetooth ® wireless tech-
nology.
As the operation is not necessarily the
same for the three options, a distinction
is made at the appropriate points:
• For functions and settings that are
only available with a mobile phone
connected, this is indicated by “mo-
bile phone only”.
• For functions and settings that are
only available with a built-in phone,
this is indicated by “internal phone
only”.
• For functions that are only available
for a connection via SIM-Access, this
is indicated by “SIM-Access only”.
Notes:
(mobile phone only)
• The Cascade can operate a mobile
phone equipped with Bluetooth®
wireless technology. We support the
Bluetooth® wireless technology pro-
file HFP1.0. Mobile phones without
Bluetooth® wireless technology can-
not be operated.
• It is possible that some of the func-
tions described are not available with
some mobile phones equipped with
Bluetooth® wireless technology.
Further information is available on
the website www.becker.de.
• If your mobile phone is connected to
the Cascade or the internal phone is
active and the Cascade is switched off
(ignition still on or ignition key in ra-
dio position), the Cascade is switched
on by an incoming call.