39
Navigation mode
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
The entry is adopted.
! Turn the rotary control/push button
and then press the rotary control/push
button to select each letter in the first
name one after the other.
! In the data entry menu, select the
symbol.
or
! Press the rotary control/push button
and hold it down for at least 2 seconds.
The address book entry appears.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the
Save entry.
A confirmation that the entry has been
saved appears.
! Press the rotary control/push button
.
Adding data to entries
! Select the Amend entry entry.
! Turn the rotary control/push button
and then press the rotary control/push
button to select the entry to which you
wish to add data.
The navigation address previously
selected is added to the selected address
book entry.
If the selected address book entry already
contains an address, the following prompt
appears:
! In the prompt, select Yes to overwrite
the existing address or
No to retain the
address.
If you select
Yes, the existing address
will be overwritten.
2031
2032
Note:
If there are more than 10 entries in the
address book, the data entry menu for
locating the required name appears.
2032
2034
To Next Page
Loading...
Need help?
General
