Brady BMP 61 - File Management and Printing; Managing Label Files

BMP
®
61 Label Printer User’s Manual 4-1
4 File Management
Label Files
Figure 4-1. File menu options
A single label or a number of labels can be saved as a file, to be opened and reused at a
later date. The following are guidelines when creating a label file:
• Labels using continuous media or die-cut media cannot be combined in the same label file.
All labels in a label file must use the same label part number.
• Serialized labels cannot be combined in a file with other non-serialized labels.
Save
A saved file is held internally in the printer, even when the power is turned off. The saved
file retains the label data, data attributes, and alignment parameters. This file is available
for reuse whenever needed.
File Naming Standards
To create a file on the BMP61 printer, the file must be given a name. Names can be up to
20 characters long and can consist of letters and numbers, no spaces.
When creating files, remember this rule: You cannot have two files with the same name.
If you do, the most recent file with the name will overwrite the previous file with that name.
A one-character difference in the name creates a different file and will not overwrite a
previous file.