Brady BMP 61 - Loading the BMP41-BATT Nimh Battery Pack

1-8 BMP
®
61 Label Printer User’s Manual
Loading the BMP41-BATT NiMH Battery Pack
Loading the BMP41-BATT NiMH Battery Pack
1. On the backside of the
printer, push down on
the door release latch
and swing the battery
compartment door up
and out. (The door will
come off.)
2. With the battery label
facing outward, insert
the battery pegs into the
peg slots at the top of
the compartment; then
tip the battery
downward into place.
3. Re-insert the battery
door tabs at the base of
the compartment and
swing the battery
compartment door
closed, snapping it into
place.