Brady BMP 61 - Creating and Formatting Labels; Creating and Editing Text Labels

BMP
®
61 Label Printer User’s Manual 2-1
2 Getting Started
Creating a Text Label
This section describes the process of creating a text label with minimal formatting, using
basic editing techniques, and printing the label.
Entering Text
Before entering label text, be sure the media cartridge is loaded and the power is ON.
The vertical bar on the display screen is the cursor and is the starting point for every label
you create using the BMP
®
61 printer. Begin entering text at the position of the cursor. The
cursor moves across the screen as you enter data. If you want another line of text, press
[ENTER] .
Editing Text
If you have entered some text in error or want to change the content or format of your
label, edit the information before printing.
Inserting Text
To insert additional text within a line of text:
1. Using navigation keys, position the cursor at the point where text should be inserted.
OR
Touch the screen at the point where text should be inserted.
2. Enter the text.