BMP
®
61 Label Printer
User’s Manual
3-15
Labels and Areas
Add Label or Area
Note: Labels cannot be added to files containing serialization.
To add a label to a label file:
1. Press Label .
OR, to add an area to a single label:
Press Area .
2. Choose Add.
The new label is inserted immediately after the current label and its number is
reflected on the right side of the Header bar. Each label added will be of the same
application, label type, and format.
A new area is inserted immediately after the current area and is reflected on the
right side of the Header bar. The font size used on the first line of the previous
area carries over to the new area.
To Next Page
Loading...
