3-6 BMP
®
61 Label Printer
User’s Manual
Font
Superscript/Subscript
Superscript places a character slightly above the line of type and subscript places
a character slightly below the line of type. The super- or subscript character also
displays slightly smaller than the normal line of type. Superscript and subscript
functions are on the numeric keypad. Pressing either the superscript or subscript
key applies that format to the next character typed. It immediately turns off after
the character is entered and you are returned to the normal line of type.
To apply Superscript or Subscript:
1. Position the cursor in the line of text where the superscript or subscript
character will display.
2. Press Sup or Sub .
3. Type the character to be displayed in superscript or subscript.
Only the character typed directly after pressing the superscript or subscript key is
displayed in super- or subscript.
Multi-Characters
To place a number of characters in Super- or Subscript at one time, first enter the
text, then highlight the characters to place in Super- or Subscript.
Figure 3-3. Applying Subscript to multiple characters
To Next Page
Loading...
