BMP
®
61 Label Printer
User’s Manual
6-5
Flags
Flags
A Flag label wraps around a wire or cable, with the ends joined together to form a
flag. The Flag application is designed to work with continuous media or specific
multi-area die cut labels.
To use a Flag label type:
1. Press Label Type .
2. Select Flags.
A dialog box displays the different Flag layouts, preceded by a radio button. (For a
review of dialog box navigation, see "Dialog Boxes” on page 1-37.)
To configure a flag layout:
1. Select the radio button of the desired layout.
2. If continuous media is installed, in the Flag Length field, enter the length of the
flag (the part that contains the text).
To Next Page
Loading...
