Brady BMP 61 - Recycling the Label and Ribbon Cartridge; Materials; Dismantling the Ribbon

BMP
®
61 Label Printer User’s Manual 1-23
Recycling the Label and Ribbon Cartridge
Recycling the Label and Ribbon Cartridge
Cartridges need to be recycled in accordance with local regulations. Before
recycling, the used cartridges must be pulled apart to release the individual
components. These various components must then be recycled in the correct
recycling bins.
Materials
• 1/4-inch blade flathead screwdriver
• Safety Glasses
• Safety Gloves
CAUTION!
ALWAYS wear Personal Protective Equipment when dismantling a cartridge.
Dismantling the Ribbon
To dismantle the ribbon:
1. Using your thumbnail, press the clear plastic locking tab down. While holding
the tab down, insert the blade of the screwdriver above the smart cell and
slide downward. The smart cell easily slides out for removal.