BMP
®
61 Label Printer
User’s Manual
3-5
Font
Expand/Condense
Expanding and condensing data affects character width and the spacing between
characters in a word. Data can be expanded or condensed according to
predefined percentages.
Figure 3-2. Expaned and condensed text
To Expand or Condense data, as it is entered:
1. Position the cursor where Expand or Condense should take affect.
2. Press Font .
3. Select Exp/Cond, then select the percentage desired.
While entering data, the expand or condense attribute stays on until it is returned
to 100%, or until you move to a new area or label.
To expand or condense pre-existing data:
1. Highlight the data.
2. Press Font .
3. Select Exp/Cond, then select the percentage desired.
All highlighted text takes on the attribute.
Standard Expanded Condensed
To Next Page
Loading...
