1-18 BMP
®
61 Label Printer
User’s Manual
Media
Unload Media
1. To open the printer cover, put your thumb
under the finger tab and push up.
2. Flip the printhead lock lever backward (to
the right) to disengage the printhead.
3. If label spool is not empty, gently rewind
the spool with your finger to back the
unused media out from under the print
head.
4. Grasp the media roll smart cell guide and
gently pull up out of the tape well.
5. If you do not want to load any more media, close the printer cover by pressing down on
the cover until it catches.
To Next Page
Loading...
