BMP
®
61 Label Printer
User’s Manual
3-3
Font
Font Attributes
Font attributes (bold, italics, underline) can be applied to individual characters in a
line of text.
To turn an attribute on:
1. Position the cursor where the attribute should take affect.
2. Press Font .
3. Select the desired attribute, then select ON.
4. Enter the text to be affected by the attribute.
If applying the attribute to text as it is being typed, the attribute stays on until it is
turned off, or until you move to a new area or label.
To turn the attribute off:
1. Press Font .
2. Select the attribute, then select OFF.
Pre-Existing Data
To apply an attribute to previously entered text:
1. Hold Shift while moving the cursor with the navigation keys across the
characters to which the attribute will be applied.
OR
1. At the beginning of the character string that will display the attribute, touch
and briefly hold, the screen until the cursor disappears.
2. Drag your finger across the screen to the end of the character string that will
display the attribute.
This highlights the data.
To Next Page
