BMP
®
61 Label Printer
User’s Manual
6-9
Terminal Block, 66 Block, Patch Panel
If you intend to use serialization for the Terminal Block, 66-Block, or Patch Panel
label type, you do not need to enter the Number of Terminals. The serialization
values determine how many labels to create.
5. To serialize data, select Serialize to place a checkmark in the option box.
Once Serialize is selected, the Number of Terminals field grays out, making it
inaccessible to enter data.
6. In the Separator field, from the drop down list, select the separator to use.
Figure 6-6. Separators and Orientation
7. In the Orientation field, from the drop down list, select the desired layout.
8. When finished, select .
If the Serialize option box is checked, the Serial dialog box displays.
Line Separator, Vertical Orientation Tic Separator, Horizontal Orientation
To Next Page
Loading...
