BMP
®
61 User’s Manual
Batteries Directive 2006/66/EC
This product contains a lithium coin cell battery. The crossed-out wheeled
bin shown to the left is used to indicate 'separate collection' for all batteries
and accumulators in accordance with European Directive 2006/66/EC.
Users of batteries must not dispose of batteries as unsorted municipal
waste. This Directive determines the framework for the return and
recycling of used batteries and accumulators that are to be collected
separately and recycled at end of life. Please dispose of the battery
according to your local regulations.
Notice to Recyclers
To remove the lithium coin cell battery:
1. Disassemble printer and locate the lithium coin cell battery located on the main circuit
board.
2. Using a small screwdriver, pry the battery from its holder and remove the battery from the
board. Dispose of in accordance with local regulations.
To remove the NiMH battery pack:
1. Turn the printer over, open the battery compartment door, and remove the NiMH battery
pack.
2. Dispose of the pack in accordance with local regulations.
To Next Page
Loading...
