Brother MFC-9330CDW Service Manual

5-18
Confidential
1.4.8 Operational check of control panel key (Function code 13)
<Function>
This function allows you to check if the keys on the control panel work normally.
<Operating procedure>
(1) Press the 1 and 3 keys in this order in the initial state of the maintenance mode.
"00" is displayed on the LCD.
(2) Press the keys in the order designated in the figure shown below. The LCD shows the
corresponding number in decimal notation each time a key is pressed.
Check that the displayed number is correct by referring to the figure below. If the keys are
pressed in the incorrect order, the machine displays the "INVALID OPERATE" on the LCD.
Press the Stop key, and then press the correct keys.
(3) After the last number key is pressed, the machine returns to the initial state of the
maintenance mode.
To cancel this operation and return the machine to the initial state of the maintenance
mode during the above procedure, press the Stop key.
Fig. 5-8

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes