Brother MFC-9330CDW Service Manual

5-71
Confidential
2.3 Deletion of User Setting Information, etc.
In this machine, the user setting information is stored in the EEPROM and flash memory of the
main PCB. You can delete all the data listed below at a time with the procedure given below.
- Information related to Net
- User setting information
<Operating procedure>
(1) Press "Menu" on the LCD in the ready state.
(2) Press "All Settings" on the LCD.
(3) Press "Initial Setup" on the LCD.
(4) Press "Reset" on the LCD.
(5) Press "All Settings" on the LCD.
(6) Once "Reset All Settings? Yes No" appears on the LCD, press the Yes key.
(7) "Reboot OK? Press [Yes] for 2 sedonds to confirm." will appear on the LCD. Press "Yes"
for 2 seconds or longer, the user settings are cleared, and the machine returns to the
ready state.
Note:
The machine returns to the ready state automatically if no panel operation is implemented
for 30 seconds.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes