Brother MFC-9330CDW Service Manual

5-70
Confidential
2.2 Parts Life Reset Function (Drum unit/Belt unit)
This function is used to reset the relevant part counter when the user replaced a consumable
part with the correct procedure, and also used to forcibly reset the relevant part counter when
an error cannot be resolved because the user did not replace a consumable part with the
correct procedure.
<Operating procedure>
(1) Press "Menu" on the LCD in the ready state.
(2) Press "All Settings" on the LCD.
(3) Press "Machine Info." on the LCD.
(4) Press "Parts Life" on the LCD.
(5) When the list of consumable parts appears on the LCD, touch any key (about 4 cm from
the Home key on the right side) that have stayed OFF on the control panel to illuminate
the # key. Hold it down for 5 seconds or longer.
(6) "Reset Menu" is displayed on the LCD. Select the consumable part you want to reset.
<Consumable parts are displayed on the LCD>
- Drum Black(BK)
- Drum Cyan(C)
- Drum Magenta(M)
- Drum Yellow(Y)
-Belt Unit
(7) Once "Reset? Yes No" appears on the LCD, press the Yes key.
"Accepted" is displayed on the LCD, and the counter is cleared.
When the machine finishes resetting, it returns to "Reset Menu".
(8) Press the Home key to return the machine to the ready state.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes